Mohawk’s LC-12 is a low ceiling clear floor above ground lift, capable of raising light and medium duty vehicles up to 12,000 lbs. The LC-12 is a twin cylinder direct drive design using no chains or cables. 3 stage swing arms are standard on the LC-12-3SA.
- Mohawk columns are constructed of 3/4” thick forklift masts, for a lifetime of trouble-free service.
- Each Mohawk carriage rolls on 8 double-sealed, self-lubricating, steel ball bearing rollers (NOT plastic sliders).
- Two 4” heavy duty cylinders make for safer, steadier lifting than single cylinder lifts or models with tiny cylinders.
- Easily adjustable overhead stainless steel hydraulic lines can be set at any height (or routed in floor) to accommodate all tall trucks and vans.
- Low profile 5” (4 1/2” with 3 stage arms) swing arms fit under most passenger cars.
- Equipped with Mohawk’s 5″, 7 1/2″ and 10″ stackable lift adaptor pads.
- Available with optional lower height three stage swing arms that retract 2” (1” each side) shorter and reach 10” longer for varied fleets.
Capacity: ............................................................... 12,000 lbs. (5,443.11 kg)
Lifting Speed: ...................................................... 80 seconds at full load (faster with lighter vehicles)
Motor Rating: ...................................................... 2.5 HP/208-230V,Single-phase (3ø optional)
Synchronization: ................................................ Hydraulic fluid displacement using no chains, cables, or overhead obstructions
Arm Pad Height: ................................................. 5” (12.7 cm) min.
Lifting Height: ..................................................... 6’ (1.83 m) under arm
Lift Pad Height @ Full Rise: ........................... 6’ 5” (1.96 m)
Lift Pad Height @ Full Rise w/Adaptors: .. 7’3” (2.21 m)
Overall Width: ..................................................... 12’ 7” (3.84 m) (adjustable)
Width Between Posts: ..................................... 10’ (3.05 m) (adjustable)
Width Between Lifting Arms: ........................ 8’ 10” (2.69 m) (adjustable)
Column Height: ................................................... 8’ 7” (2.62 m)
Overhead Hydraulic Line Height: ................. 12’ (3.66 m) Standard (adjustable to accommodate any height ceiling or routed in-floor)
Weight: .................................................................. 2900 lbs. (1,315.42 kg)
Concrete Floor Requirements: ..................... 4000 psi (27579.02 kPa) mix 61/2” (16.51 cm) depth
Anchoring System: Included ......................... (16) 3/4”x6” (1.9x15.2 cm) bolts
Mechanical Safety Locks: .............................. Automatic; all position starting ground level
Hydraulic Safety Systems: ............................. Automatic; all position
Swing Arm Restraints: ..................................... Automatic upon ascent
Cylinders: .............................................................. 2 (1 per column)
Drive System: ...................................................... #BL-848 leaf chain routed over cylinder
5” Frame Adaptors (stackable): ................... 4 included as standard equipment
71/2” Frame Adaptors (stackable): .............. 4 included as standard equipment
10” Frame Adaptors (stackable): ................ 4 included as standard equipment
4” Steel Carriage Bearings: ........................... 8 per carriage, double sealed, self-lubricating
Floor Access Between Posts: ....................... Clear and unobstructed
