Mohawk’s A-7 model is an asymmetric two post lift with a 7,000 lb. lifting capacity. This asymmetric design allows Mohawk’s A-7 lift to fit in narrow 10’ wide bays while all vehicle doors are fully opened. The A-7 also features a clear floor work area designed for free and easy access around your shop.
- Mohawk columns are constructed of 3/4” thick shaped forklift masts, for a lifetime of trouble-free service.
- Each Mohawk carriage rolls on 8 double-sealed, self-lubricating steel ball bearing rollers. Not plastic slide blocks. (see picture 8 )
- Two large heavy duty cylinders make for safer, steadier lifting than single cylinder lifts or models with tiny cylinders. (see picture 9)
- Height adjustable overhead stainless steel hydraulic lines can be set at any height to accommodate tall trucks and vans. Optional in-ground hydraulic lines available. (see picture 12)
- 4” low profile swing arms fit under the lowest riding sports cars.
- 3” and 6” stackable truck adaptors are included as standard equipment. (see picture 5)
- Adjustable column width by lengthening the overhead steal hydraulic lines.
- Rotated columns and offset arms allow damage-free opening of vehicle doors or convenient under-dash access whether on or off the ground. (see picture 1)
- Fits even in narrow service bays with 10’7” total width or shops with low ceilings.
Lifting Speed: .................................... 45 sec.
Motor Rating: ..................................... 2 HP/208-230V, Single-phase (3ø optional)
Synchronization: ............................... Hydraulic fluid displacement using no chains, cables, or overhead obstructions
Arm Pad Height: ................................ 4” (10.2 cm) min.
Lifting Height (Stroke): ................... 6’ (1.83 m)
Arm Height at Full Rise: .................. 6’4” (1.93m)
Lift Pad Height with Adaptors: ...... 7’ 1” (2.16 m)
Overall Width: .................................... 10’ 7” (3.23 m) to 11’1” (3.33 m)
Width Between Posts: ..................... 7’ 7-1/8” to 8’ 1 1/8” (2.46 m)
Width Between Lifting Arms: ......... 6’ 11-3/8” (2.12 m) to 7’ 5 3/8”( 2.26m)
Column Height: .................................. 7’ 11-1/2” (2.43 m)
Overhead Hydraulic Line Height: .. 12’ (3.66 m) Standard (adjustable to accommodate any height ceiling or routed in-floor)
Lift Weight: ......................................... 2000 lbs. (907.2 kg)
Concrete Floor Requirements: ...... 4000 psi (27579.02 kPa) mix 4 1/2” (11.43 cm) depth
Anchoring System: Included .......... 14 3/4”x5” (1.90x12.7 cm) Wej-it bolts
Mechanical Safety Locks: .............. Automatic; all position starting @ 3” (7.62 cm) off the floor
Hydraulic Safety Systems: ............. Automatic; all position
Swing Arm Restraints: ..................... Automatic upon ascent (starting at 4”)
Cylinders: ............................................ 2 (1 per column)
Drive System: ..................................... #646 leaf chain routed over cylinder
3” Truck Adaptors (stackable): ..... 4 included as standard equipment
6” Truck Adaptors (stackable): ..... 4 included as standard equipment
Steel Carriage Bearings: ................. 8 per carriage, double sealed, self-lubricating
Floor Access Between Posts: ........ Clear and unobstructed
