Auto Lift, 2-post, 10,000 lb. Capacity, Symmetric / Asymmetric with mirrored "S" shaped column and adjustable height and width (Challenger Lifts - Model SA10) - Automotive Equipment Distributors | Automotive Tools And Equipment | Auto Lift Equipment

3-stage front arms provide greater overall arm sweep
Set up in a symmetric or asymmetric configuration
Adjustable height and width options accommodate varying service bay sizes
Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
Rubber foot pads minimize stress to vehicles with delicate undercoatings
Padded overhead shut off system prevents vehicle damage
Single-point mechanical lock release system allows technician to disengage both columns simultaneously
Wide rubber door guards protects vehicle from door damage
Premium powder coat finish provides long-lasting durability
Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability
Mirrored “S” shaped column

Model	SA10
	Symmetric Application	Aymmetric Application
Lifting Capacity*	10,000 lbs.
A: Rise Height(1)	74-1/2"
B: Overall Height	11' 4-1/2" / 11' 10-1/2"
C: Overall Height (Cylinder Extended)	11' 10-1/2"
D: Overall Base Width	10' 9" / 11' 3"	10' 11-1/2" / 11' 5-1/2"
E: Drive-Thru Clearance	92-3/4" / 98-3/4"	88-1/2" / 94-1/2"
F: Floor to Overhead Switch	131-1/8" 137-1/8"
G: Short Arm Reach	22-3/8" - 41-1/2"
H: Long Arm Reach	38-1/4" - 59"
I: Screw Pad Height(2)	4-3/8" - 6-1/2"
J: Inside of Columns	106-3/4" / 112-3/4"	101-1/2" / 107-1/2"
Motor	2HP, Single Phase, 60Hz
Voltage	208 - 230v
Speed of Rise	48 seconds
Max. Load Per Arm	2,500 lb.
Ceiling Height Required	12'

*Lift capacity ratings are based on loads equally distributed on all four arms.
1 Rise height measured with telescoping screw pad in highest position
2 Specifications are listed with lift at maximum width and/or height settings.
3 Overall Width of Asymmetric lift is 11’ 3” / 11’ 9” including Power Unit.
† Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

$1,920.74

Auto Lift, 2-post, 10,000 lb. Capacity, Symmetric / Asymmetric with mirrored "S" shaped column and adjustable height and width (Challenger Lifts - Model SA10)