BendPak's HD-7PXW is a super-tall, four-post, runway-style lift platform designed for professional use in service bays. A true lifting powerhouse, this high-speed lift will easily hoist 3-1/2 tons to heights exceeding 12'. Now you can finally store your high-profile trucks, vans and Winnebagos.
Dependable design
Dual-hub cable sheaves
Multi-level locking positions
Heavy-duty aircraft cable
Electric / hydraulic power system
Large base plates
Single hydraulic cylinder
Durable powder-coat finish
Integrated design
Automatic safety locks
- 7,000-lb. maximum lifting capacity
- Super-tall lift
- Runways include outside guide rails
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
MODEL HD-7PXW (Rev. M)
Configuration Wide / Super-Tall Rise
Lifting Capacity 7,000 Lbs. / 3175 Kg.
Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
A - Overall Width 110-1/4" / 2800 mm.
B - Outside Length 198” / 5029 mm.
C - Overall Length 213” / 5410 mm.
D - Height of Columns 158” / 4011 mm.
E – Min. Runway Height 4-1/2” / 114 mm.
F – Max. Rise 140” / 3556 mm.
G - Max. Lifting Height 145” / 3685 mm.
H - Width Between Columns 100-1/4” / 2,555 mm.
I - Runway Width 19” / 483 mm.
J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
J - Width Between Runways (*) WIDE 44-3/8" / 1127 mm.
K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
K - Runway Centerline (*) WIDE 63-3/8" / 1610 mm.
L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
L - Outside Edge of Runways (*) WIDE 82-3/8" / 2092 mm.
M - Drive-Thru-Clearance 86-1/2" / 2197 mm.
N - Length of Runways 188" / 4775 mm.
Min. Wheelbase @ Rated Capacity 135" / 3429 mm.
Min. Wheelbase @ 75% Capacity 115" / 2921 mm.
Min. Wheelbase @ 50% Capacity 95" / 2413 mm.
Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
Locking Positions 30
Lock Spacing Every 4" / 102 mm.
Lifting Time 60 Seconds
Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.
* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.
An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
